Laser Rotary Pneumatic Chuck For Professional Laser Tube Cutting Machine
1. Descripition
Our pneumatic chuck is mainly designed for laser tube cutting machine. Pneumatic chuck is applied to clamp and loosen tubes and feed tubes when cutting tube. Except round tubes, our pneumatic chuck can also clamp rectanbular, square, H-shape and L-shape tubes.
It is used base point positioning and it is convenient for the adjustment of the main quipment and greatly shortens the debugging time of the main equipment. And our design is full stroke design. There's no need to adjust the jaw, it is easy to clamp and centering, to achieve switching different pipe diameters, which greatly saving clamping time.
The pneuamtic chuck can work in full stroke without additional adjustment of four jaws.Adopting a fully closed structure, the chuck has better stability and wear resistance.It has longer service life, higher rotary accuracy and repeated positioning accuracy becaused of the inner cross roller bearing. This pneumatic chuck is widely applied to professional pipe cutting machine and other pipe processing machine system.
2. Performance Parameters
| | G500DC-230 |
| | 220mm |
| | 1.5KN |
| | 0.3-0.9MPa |
| | 150r/min |
| | 8-228mm |
| | 315mm |
| | 4.18Kg.m2 |
| | 124kg |
| | 245kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | R | S |
| G500DC-230 | 420 | 315 | 600 | 615 | 220 | 60 | 380 | 368 | 230 | 265 | 12-M8 | 18X22 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e. 1 Solid or hollow
e. 2 Comb-type or mortise-groove type claws |
5. Production Line
